Menu items with the dxc-d50-series cameras, Menu items with the ccu-tx50, Paint menu (with the dxc-d50 series) – Sony Remote Control Panel RCP-D50/D51 User Manual
Page 20
![background image](/manuals/138359/20/background.png)
20
Menu Configuration and Basic Menu Operations
Menu Items with the DXC-D50-Series Cameras
The “Control items” marked with
z
are those assigned
to the control knobs. The other items are operated on
the menu display.
Paint menu (with the DXC-D50 series)
Paint menu consists of pages 1 to 5.
You can select page 1 through 3 directly by pressing
the MENU buttons, PAINT 1, PAINT 2, or PAINT 3.
Pressing v or V of the page selected with a MENU
button flip pages 1 through 5 in sequence.
Page
Menu
Submenu
Control item
Function
Paint 1
White
White Preset
To retrieve the white balance settings preset by the camera
Memory A
To retrieve the white-balance settings stored in Memory A. The
retrieved settings can be adjusted in Auto or Manual mode (the
adjusted values are stored in Memory A).
Memory B
To retrieve the white-balance settings stored in Memory B. The
retrieved settings can be adjusted in Auto or Manual mode (the
adjusted values are stored in Memory B).
ATW
To turn ON/OFF the Auto Tracing White function (which
automatically adjusts the white balance when lighting conditions
change)
• R
To adjust the gain of the R signal in the white when Memory A or
Memory B is pressed
• B
To adjust the gain of the B signal in the white when Memory A or
Memory B is pressed
Black
• R
To adjust the gain of the R signal in the black
• B
To adjust the gain of the B signal in the black
• Master
To adjust the master black
Flare
Flare Off
To turn the flare (black level when flare is generated) correction
function ON/OFF
• R
To adjust the amount of flare correction for the R signal
• G
To adjust the amount of flare correction for the G signal
• B
To adjust the amount of flare correction for the B signal
Gamma/Knee
Auto Knee
To turn the Auto Knee circuit ON/OFF
• Gamma
To adjust the gamma level
• Blk Gamma
To adjust the black gamma level
• Knee Point
To adjust the level at which the knee correction starts. As the value
becomes larger, the start level decreases, which enhances the knee
correction effects.
• Knee Slope
To adjust the knee slope (amount of knee correction)
The items displayed differ according to whether the
unit is in Advanced Setting mode or in Normal Setting
mode. The items shaded (
) in the table below are
displayed only in Advanced Setting mode.
Switching between Normal Setting mode and
Advanced Setting mode is performed in RCP Config
(Security
→ Status) on the OTHERS menu.
Paint 4 and 5 can also be selected in sequence by
pressing the PAINT 3 button.