Menu configuration and basic menu operations – Sony Remote Control Panel RCP-D50/D51 User Manual
Page 28
![background image](/manuals/138359/28/background.png)
28
Menu Configuration and Basic Menu Operations
Page
Menu
Submenu
Control item
Function
Paint 2
Detail
Detail 1
• Level
To adjust the detail (contour correction) level
• H/V Ratio
To adjust the ratio of V (vertical) detail to H (horizontal) detail in
detail correction. As the value becomes larger, the V detail ratio
increases.
• Frequency
To adjust the boost frequency (thickness of contour lines) for the
detail correction
• V-Limit
To adjust the limit value for vertical detail
Detail 2
• Crispening
To adjust the crispening level (appropriate level at which details of
noise signals are removed)
• Level Dep
To adjust the level dependence (level at which the detail signal starts
being suppressed)
• High L.
To adjust the amount of suppression of highlight detail (detail added
to a high-luminance area)
• AFT GAM
To adjust the amount of detail added after gamma correction
Detail 3
Aperture
To turn the aperture correction ON/OFF
Knee Apert
To turn ON/OFF the detail correction to the level higher than the
knee point
• Aperture
To adjust the amount of aperture correction
• Knee Apert
To adjust the amount of detail correction to the level higher than the
knee point
Cross Color
Comb Filter R
To turn the red comb filter in the detail circuit ON/OFF. If OFF is
selected, clarity improves, but cross color increases.
Comb Filter G
To turn the green comb filter in the detail circuit ON/OFF. If OFF is
selected, clarity improves, but cross color increases.
• CCS Level
To adjust the cross color suppress level to suppress the phenomenon
of color jittering or coloring when a minutely striped pattern is shot
Skin Detail
Skin Detail 1
Detail Gate
To turn ON/OFF the skin gate area (target color range of skin detail
correction or skin matrix adjustment)
Skin DTL
To turn the skin detail function (which suppresses the contour
correction in the selected area) ON/OFF
Auto Skin
The unit will go to Standby mode when this button is pressed, and
will automatically start obtaining the skin gate area data when Start
is pressed.
• Level
To adjust the amount of skin detail correction. As the value becomes
larger, the amount of detail in the skin gate area decreases.
• Size
To adjust the R–Y and B–Y ranges of the skin gate area (for setting
each range to the same value at the same time)
• R-Y
To adjust the R–Y range of the skin gate area
• B-Y
To adjust the B–Y range of the skin gate area
Skin Detail 2
Skin Gate
To turn the display of skin gate area ON/OFF
Skin DTL
To turn the skin detail function ON/OFF
Auto Skin
The unit will go to Standby mode when this button is pressed, and
will automatically start obtaining the skin gate area data when Start
is pressed.
• Level
To adjust the skin detail level
• Posi
To adjust the R–Y and B–Y position of the skin detail gate area (for
setting each range to the same value at the same time)
• R-Y
To adjust the R–Y position of the skin detail gate area
• B-Y
To adjust the B–Y position of the skin detail gate area