Sony Remote Control Panel RCP-D50/D51 User Manual
Page 21
![background image](/manuals/138359/21/background.png)
21
Page
Menu
Submenu
Control item
Function
Paint 2
Detail
Detail 1
• Level
To adjust the detail (contour correction) level
• H/V Ratio
To adjust the ratio of V (Vertical) detail to H (Horizontal) detail in
detail correction. As the value becomes larger, the V detail ratio
increases.
• Frequency
To adjust the boost frequency (thickness of contour lines) for the
detail correction
Detail 2
• Crispening
To adjust the crispening level (appropriate level at which details of
noise signals are removed)
• Level Dep
To adjust the level dependence (level at which the detail signal starts
being suppressed)
Cross Color
• CCS Level
To adjust the cross color suppress level to suppress the phenomenon
of color jittering or coloring when a minutely striped pattern is shot
Skin Detail
Detail Gate
To turn ON/OFF the skin gate area (target color range of skin detail
correction or skin matrix adjustment)
Skin DTL
To turn the skin detail function (which suppresses the contour
correction in the selected area) ON/OFF
Auto Skin
The unit will go to Standby mode when this button is pressed, and
will automatically start obtaining the skin gate area data when Start
is pressed.
• Level
To adjust the amount of skin detail correction. As the value becomes
larger, the amount of detail in the skin gate area decreases.
• Phase
To adjust the color phase of the designated area
• Width
To adjust the color width of the designated area
• Sat
To adjust the color saturation of the designated area
Black Gamma
• R
To adjust the level of the black R gamma
• B
To adjust the level of the black B gamma
• Master
To adjust the master black gamma
Paint 3
Knee/DL
Auto Knee
To turn the auto knee ON/OFF
• Point
To adjust the level at which the knee correction starts. As the value
becomes larger, the start level decreases, which enhances the knee
correction effects.
• Slope
To adjust the knee slope (amount of knee correction)
Gamma
• R
To adjust the level of the R gamma
• B
To adjust the level of the B gamma
• Master
To adjust the master gamma
Matrix
Matrix 1
• Hue
To adjust the hue of the linear matrix
• Sat
To adjust the color saturation of the linear matrix
• Matrix
To select the Matrix Adjustment mode
STD: Standard
FL: For shooting under fluorescent light
High Sat: High saturation (increasing the saturation of primary
colors)
Matrix 2
• R-G/• G-B/• B-R
To adjust the color tone for the R–G, G–B, or B–R elements of the
matrix
• Matrix
To select the Matrix Adjustment mode
Matrix 3
• R-B/• G-R/• B-G
To adjust the color tone for the R–B, G–R, or B–G elements of the
matrix
• Matrix
To select the Matrix Adjustment mode
Skin Matrix
Skin Matrix
To select the skin matrix function ON/OFF
• Hue
To adjust the hue of the designated area
• Sat
To adjust the color saturation of the designated area