Intel SC5400 User Manual
Page 46
28
Intel® Server Chassis SC5400 User’s Guide
6. Remove the DVD/CD-ROM drive/slide assembly from the chassis by pressing in
on the slide release latches (see letter “A” in the following figure). Remove the
slides from the DVD or CD-ROM drive by pulling the slides away from the drive
(see letter “B”). A gentle pull should release the slide from the side dimple on the
drive.
7. If not replacing with another drive, re-attach pair of slides to an EMI shield and re-
insert EMI shield/slide assembly into chassis for proper airflow.
Figure 19. Re-inserting Empty EMI Shield/Slide Assembly into Chassis
8. Install the front bezel. For instructions, see
“Removing and Installing the Front
.
9. Install the chassis cover. For instructions, see
“Installing the Chassis Cover” on
.
10. Plug all peripheral devices and the AC power cable into the server.
11. Power up the server.
AF000575
A
A
B
B
AF000605