Removing and installing a dvd or cd-rom drive, Removing a dvd or cd-rom drive, Removing and installing a dvd or – Intel SC5400 User Manual
Page 45
Intel® Server Chassis SC5400 User’s Guide
27
7. If not replacing with another drive, re-attach pair of slides to an EMI shield and re-
insert EMI shield/slide assembly into chassis for proper airflow.
Figure 18. Re-inserting Empty EMI Shield/Slide Assembly into Chassis
8. Install the front bezel. For instructions, see
“Removing and Installing the Front
9. Install the chassis cover. For instructions, see
“Installing the Chassis Cover” on
10. Plug all peripheral devices and the AC power cable into the server.
11. Power up the server.
Removing and Installing a DVD or CD-ROM
Drive
Removing a DVD or CD-ROM Drive
1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see
“Removing the Chassis Cover” on
4. Remove the front bezel if it is installed. For instructions, see
Installing the Front Bezel” on page 18
5. Disconnect the power and data cables to the DVD/CD-ROM drive.
AF000605