ISEKI CISCO SYSTEMS OL-5450-10 - Manual (Page 67)

67
Release Notes for VPN Client, Release 4.0 through Release 4.0.5.D
OL-5450-10
Caveats Resolved in Release 4.0.4
The problem is, the client installs the stateful firewall on the machine. It trips
over stateful firewall (if it is not started) even when customers don't have the
stateful firewall turned on. As a fix, if the stateful firewall is not started by
end-users, and if that is the only firewall installed on the system, the client
will not display a dialog box.
If stateful firewall is turned on, and if it is not started at SBL, the VPN Client
still displays the dialog box. If there are other Cisco supported firewalls on
the system that are not started, we display the dialog box.
• CSCee54533
Windows 2000 OS-added route doesn’t get incremented after client connects.
On Windows 2000 machines the operating system adds routes (routes that are
added by default when an interface comes up). These routes have a metric of
1, and we do not increment the metric of the original route. We do not see this
issue in Windows XP.
• CSCee55801
The VPN Client graphical user interface hangs or displays “Warning 201: The
Cisco Vpn service is not responding” at Start Before Login.
This happens only when Zone service (vsmon.exe) is installed on the system.
This service is installed by Zone Alarm Pro or Zone Integrity Agent.
Cisco VPN service adds a rule to the Zone service to allow VPN traffic when
Cisco VPN service is first started. But it is possible that the OS starts the
Cisco VPN service before the Zone service is started. In that case, the Cisco
service gets blocked while trying to add those rules.
Caveats Resolved in Release 4.0.4
Release 4.0.4 resolves the following issues:
• CSCed50673
If an IPSec SA has expired and has not been renewed by the VPN 3000
Concentrator, the system displays an INTERNAL ERROR: INVALID
REASON CODE message when you issue the VPN Client stat command.
• CSCed72716
On a Linux machine running version 2.6.2 kernel or higher, the Cisco Linux
VPN Client 4.0.3(B) hangs when trying to connect.