ISEKI CISCO SYSTEMS OL-5450-10 - Manual (Page 65)

65
Release Notes for VPN Client, Release 4.0 through Release 4.0.5.D
OL-5450-10
Caveats Resolved in Release 4.0.4.B
• CSCee66699
When trying to install the 4.0.4 version of the VPN Client on a Windows 2000
PC which was built with a ghost image, we get the error,
"Error 28001 MS TCP/IP is not installed"
and cannot install the VPN Client.
• CSCee84411
Split-tunneling does not work under certain circumstances for 4.0.4.C version
of the VPN Client.
Caveats Resolved in Release 4.0.4.B
Release 4.0.4.B resolves the following issues:
• CSCdt41308
You may see a problem with FTP file transfers over a long period of time
(hours) while connected with the VPN Client. The symptom is that the FTP
session never starts (no response to the 'open' command) and the Client Log
Viewer shows the following events:
74 22:31:08.704 02/08/01 Sev=Warning/2 IPSEC/0xE370000C
Failed to acquire a TCP control resource, the queue is empty.
75 22:31:08.704 02/08/01 Sev=Warning/2 IPSEC/0xA370001A
VRS processing failed, discarding packet
Other applications like PING and HTTP should work fine, but for FTP to
work again, you must disconnect and reconnect the VPN Client.
• CSCec43877
While attempting to connect a Linux VPN Client, the client seems to lock up
after the certificate password has been entered. Beginning with the Release
4.0.3.B Linux VPN Client, if the VerifyCertDN field is in use within the
profile and it does not match the server certificate sent by the VPN 3000
Concentrator, the client will hang.