Intellinet Network Solutions PRO SERIES INT-PSNC-UM-1106-06 User Manual
Page 58

- 58 -
“AREA SEL”: Use the right arrow key to select
one of the four privacy zones.
“AREA STATE”: Set to either “ON” of “OFF”. Any
area that is set to off will not be displayed.
“LEFT”: This value changes the left coordinates
of the selected privacy zone.
“RIGHT”: Changes the right coordinates of the
selected privacy zone.
“TOP”: Adjust the top end of the selected privacy zone.
“BOTTOM”: Adjust the top end of the selected privacy zone.
“COLOR”: You can change the color of the privacy mask by modifying this value.
“MIRROR”
With this function you can mirror the image. Use the
right key to set it to either “ON” or “OFF”.
normal image
mirrored image
“GAMMA”
Gamma causes the mid-tone brightness to increase or decrease. The range is limited to 0.05 to
1. Higher Gamma values help to reveal detail in the all important mid-tone regions of the image.
Use the right arrow key change the values.