Infinity DMC 1000 - Manual (Page 120)

120 DMC 1000 Digital Media Camcorder User’s Guide (v1.15)
Chapter 12 - Side panel menu
12.4 System menu
UB6 0..F (0) Sets a value for user bit 6. 0 Prod
UB7 0..F (0) Sets a value for user bit 7. 0 Prod
UB8 0..F (0) Sets a value for user bit 8. 0 Prod
setup
input type DVITC, LTC Selects timecode type to be used for the
input:
DVITC = Digital Vertical Interval Time Code;
LTC = Linear Time Code. 0 Prod
f-run sync Real time, Local value,
External Selects type of timecode synchronisation. 0 Prod
ATC SD 11..18 (11) Selects the video line number used to embed
the ATC (Ancillary Time Code) into the SD
video signal. 0 Prod
dropframe NDF, DF Selects non drop frame (NDF) mode or drop
from (DF) for timecode. 0 Prod
ATC HD NONE, 9 Selects the video line number used to embed
the ATC (Ancillary Time Code) into the HD
video signal. 0 Prod
play mode Regenerated, From file Sets the playback mode of the timecode
generator. 0 Prod
new timecode
hrs 0..24 (0) Sets value for hours. 0 Prod
min 0..59 (0) Sets value for minutes. 0 Prod
sec 0..59 (0) Sets value for seconds. 0 Prod
frms 0..29 (0) Sets value for frames. 0 Prod
recbuff
preferred media Not Active Order of preferred media when the camcorder
switches media during recording. 0 Prod
metadata
storyfile , file names> Selects story file name used in the system. 0 -
Menu item Values Description Level File
Menu item Values Description Level File
hardware
viewfinder
VF monitoring Y, R, G, B, x-G Selects type of signal to view in viewfinder:
Y = luminance signal;
R,G,B = red, green or blue channel;
x-G = inverted green channel 2 Oper
detail