Intel SX220 - Manual (Page 62)

Viglen SX220 User Guide 61
Processor Retest Disabled
Enabled Select yes for the BIOS to clear historical processor status
and retest all processors on the next boot.
Processor Serial Number Enabled
Disabled If enabled, the system records the serial number of each
processor.
Processor 1 CPU ID N/A Reports Stepping for Processor 1.
Processor 1 L2 Cache Size N/A Reports L2 Cache Size for Processor 1. This feature does
not appear if processor 1 is absent or disabled.
Processor 2 CPU ID N/A Reports Stepping for Processor 2.
Processor 2 L2 Cache Size N/A Reports L2 Cache Size for Processor 2. This feature does
not appear if processor 2 is absent or disabled.
Advanced Menu
You can make the following selections on the Advanced Menu itself. Use the
submenus for the three other selections that appear on the Advanced Menu.
Table 11: Advanced Menu Features
Feature Choices Description
PCI Configuration Memory Press
Enters submenu.
Peripheral Configuration Press
Enters Submenu
Configuration Advanced Press
Enters Submenu
Chipset Control Reset Press
Enters submenu
Configuration Data No
Yes Select Yes to clear the system configuration data during
next boot. System automatically resets to No in next boot.
Plug & Play O/S No
Yes Selecting “No” lets the BIOS configure all the devices
in the system. Selecting “Yes” allows the OS configure
Plug and Play devices.
NumLock Off
On Enables or disables the “NumLock” function at power up.
PCI Configuration Submenu
Table 12: PCI Configuration Submenu Features
Feature Choices Description
On-board SCSI Controller Selects sub-menu
On-board LAN #1
Controller Selects sub-menu
On-board LAN #2
Controller Selects sub-menu
On-board VGA Controller Selects sub-menu
Riser Card Override Enabled
Disabled
This option will only be displayed if a non-Intel chassis
is used. If enabled, all six options for PCI slots will be
displayed if disabled, only two options for PCI slots will
be displayed
PCI Slot 1B ROM Enabled
Disabled Used to enable or disable an option ROM that may be
present on a PCI add-in card installed in the slot.
In a 2U chassis, options for additional PCI slots PCI
bus B will be displayed
PCI Slot 1C ROM Enabled Used to enable or disable an option ROM that may be