FUJITSU M3097G User Manual
Page 70

(k) Halftone Pattern: Byte 1C
Value (Hex)
Halftone pattern
00
Dither pattern 0
01
Dither pattern 1
02
Dither pattern 2
03
Dither pattern 3
04 to 7F
(Reserved)
80 to 84
User down>load pattern
85 to FF
(Reserved)
If reserved value is specified, this scanner returns the following error
information as follows:
f
Status:
B©00001π (CHECK CONDITION)
f
Sense key: X©5π (ILLEGAL REQUEST)
(l) RIF (reverse image format) : Byte 1D, bit 7
This bit is used when the binary image data output is being reversed.
0: Output is not reversed
1: Output is reversed
If a 1 is specified for this scanner without the image processing II option,
this scanner returns the following error information:
f
Status:
B©00001π (CHECK CONDITION)
f
Sense key: X©5π (ILLEGAL REQUEST)
(m) Padding type: Byte 1D, bits 0 to 2
This scanner does not support Padding type. If a value other than B©000π is
specified, this scanner returns following error information:
f
Status:
B©00001π (CHECK CONDITION)
f
Sense key: X©5π (ILLEGAL REQUEST)
(n) Bit ordering: Bytes 1E to 1F
This scanner does not support bit ordering. If a value other than X©0000π is
specified, this scanner returns the following error information:
f
Status:
B©00001π (CHECK CONDITION)
f
Sense key: X©5π (ILLEGAL REQUEST)
4 $ 45