A.3 paper limitations (for adf reading only), A.3.1 areas that must not be perforated, Paper limitations (for adf reading only) – FUJITSU M3097G User Manual
Page 138: A $ 5, A.3.1, Areas that must not be perforated, Paper limitations
A.3
Paper Limitations (for ADF Reading Only)
A.3.1
Areas that must not be perforated
Perforations in the shaded areas may cause malfunctions. If you must read data
from such paper, use the flatbed:
Figure A.2 Areas that must not be perforated
15
10
10
10
10
12 12
79
(Unit : mm)
113
134
96
10
10
Center of
sensor arm
Read reference
position
Bottom of paper
Center of
sensor arm
Top of paper
Read
surface
Paper
feeding
direction
Center
of
paper
A $ 5