Furuno FM-8800D/8800S - Manual (Page 86)

4. BASIC SETUP
4-8
4. Rotate the CH knob to choose the call type and press the ENT key. One of the
following display appears depending on the call type selected above.
MESSAGE FILE 1 ENTRY
COAST ID : 00
ROUTINE
CH : 16
CALL TYPE : COAST CALL
NAME :
TCmd1 : SIMPLEX TP
TCmd2 : NO INFO
MESSAGE FILE 1 ENTRY
SHIP ID :
ROUTINE
CH : 16
CALL TYPE : SHIP CALL
NAME :
In case of Coast call In case of Ship call
MESSAGE FILE 1 ENTRY
GROUP ID : 0
CALL TYPE : GROUP CALL
NAME :
MESSAGE FILE 1 ENTRY
COAST ID : 00
TCmd2 : NO INFO
TEL :
CALL TYPE : PSTN CALL
NAME :
In case of Group call (
In case of Area call
In case of PSTN call
TCmd1 : DUPLEX TP
MESSAGE FILE 1 ENTRY
AREA : -- ---- - -- --
ROUTINE
CH : 16
CALL TYPE : AREA CALL
NAME :
°
↓ →
° ° °
REGIST ERASE REGIST ERASE
REGIST ERASE REGIST ERASE
REGIST ERASE
ROUTINE
CH : 16
TCmd1 : SIMPLEX TP
TCmd2 : NO INFO
TCmd1 : SIMPLEX TP
TCmd2 : NO INFO
TCmd1 : SIMPLEX TP
TCmd2 : NO INFO
Note3)
Note1:
The communication priority is ROUTINE only.
Note2:
The group ID will be registered automatically after a group call
message file is saved.
Note3:
If you register a group call, its group ID becomes your own group ID.