Furuno FM-8800D/8800S - Manual (Page 53)

3. DSC OPERATION FOR NON-DISTRESS CASES
3-9
4. Choose ABLE and press the ENT key. The display changes as shown below.
** Send Message **
PRESS CALL TO SEND
SHIP ACK
ROUTINE
TCmd1 : SIMPLEX TP
TCmd2 : NO INFO
CH : 08
TO : 123456789
5. Press the CALL key more than three seconds to transmit the ACK BQ. The
display changes to the standby display with a channel specified.
4) Manually acknowledging a coast or ship call with "UNABLE."
1. When the equipment is set up with manual acknowledge and an individual call
is received, the alarm sounds and the display shows the message "Individual
request call received."
Individual request
call received.
FROM : 123456789
ROUTINE
TCmd1 : SIMPLEX TP
TCmd2 : NO INFO
CH : 08
CANCEL ALARM
2. Press the CANCEL key to silence the alarm. The following display appears.
** Received Message **
APR01/ 04 12 : 34 ECC : OK
SHIP CALL
ROUTINE
TCmd1 : SIMPLEX TP
TCmd2 : NO INFO
CH : 08
FROM : 123456789
PRESS ENT TO ACK.