Furuno FM-8800D/8800S - Manual (Page 64)

3. DSC OPERATION FOR NON-DISTRESS CASES
3-20
8. TCmd1 is selected; press the ENT key.
DUPLEX TP
DATA
FAX
SIMPLEX TP
9. Choose SIMPLEX TP, DUPLEX TP, DATA or FAX as appropriate followed by
pressing the ENT key. If you chose SIMPLEX, DUPLEX, or FAX, NO INFO
appears in the Tcmd2 field. Go to step 12. If you chose DATA, go to the next
step.
10. TCmd2 is selected; press the ENT key.
S V. 26 ter
V. 27 ter
V. 32
V. 21
V. 22
V. 22 bis
V. 23
V. 26 bis T
11. Choose the data type and press the ENT key.
12. Choose CH and press the ENT key. The following window appears.
SELECT CH
NO INFO
13. Choose SELECT CH or NO INFO as appropriate followed by pressing the
ENT
key. If you chose SELECT CH, the following channel list appears. (The
example is the international, duplex channel list.) Rotate the CH knob (or
press up / down arrow key) to choose a channel and press the ENT key.
DUP CHANNEL
01
02
03
04
05
07
18
19 86 28
60
61
62
63
64
65
66 78
79
80
81
82
83
84
85 20
21
22
23
24
25
26
27
14. Press the CALL key more than three seconds to transmit the message. After
the call is transmitted, the standby display appears with channel specified.