Furuno FELCOM 16 - Manual (Page 58)

2. SYSTEM INITIALIZATION
2-24
2.7 Station List
2.7.1 Adding stations to the station list
The FELCOM 16 provides an “address book” for storing 64 station IDs. Enter
station IDs as below.
1. Press the [F8] key to display the Setup menu.
2. Press the [8] key to display the Configuration menu.
3. Press the [1] key to display the Station List.
Setup
Configuration
Station List
Ctrl+P: Print Page Up, Page Down: Move
Sort (Ctrl+G: Group, Ctrl+N: Station Name, Ctrl+T: Type)
Group Station Name Type Code ID / Address
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
01
02
03
04
05
06
07
08
abc
xyz
Seagull
E-Mail
E-Mail
TELEX
abc@ furuno.co.jp
xyz@ furuno.co.jp
584 463609999
Sample station list
4. Operate the [
↓] key to place the cursor on a blank line.
5. Press the [Enter] key.
Station Group
Station Name
Destination Type TELEX
Prefix Code
Country Code
Station ID
Modem Type
Address
Remarks
Erase the Name to delete this station.
Station list items
6. Press the [Enter] key to open the station group entry window.
7. Enter station group name, using up to five characters.
8. Press the [Enter] key to close the window.
9. Press the [
↓] key to choose Station Name.
10. Press the [Enter] key to open the station name entry window.
11. Enter station name, using up to 15 characters.
12. Press the [Enter] key to close the window.
13. Press the [
↓] key to choose Destination Type.
14. Press the [Enter] key to open the destination type window.