Lrit compliance – Furuno FELCOM 16 User Manual
Page 19
xvii
LRIT COMPLIANCE
This equipment can function as a marine communications terminal for the LRIT
(Long-Range Identification and Tracking) system, as prescribed by the IMO regulation
MSC.202(81). The LRIT uses the FELCOM's Data Report/Polling feature for LRIT position
reporting.
The LRIT system is fully automatic, thus no operation is required of the user. However,
follow the guidelines shown below to use this equipment as an LRIT device.
The data listed below is sent by the FELCOM when it receives a command from the LRIT
data center.
•
ID number of this equipment
•
Position of your ship
•
Time of position
The FELCOM sends data at intervals between 15 minutes and 6 hours.
The FELCOM automatically receives commands (related to time of position reporting,
transmission interval) from the LRIT data center. To receive the commands at all times,
keep the equipment powered and logged in.
Satellite System
Coast Station
Country B
Country C
LRIT DATA
CENTER
Country A
LRIT system