Hitachi VT-MX211A - Manual (Page 50)

CONTROLLING YOUR TV WITH THE VCR'S REMOTE
50
TV Brands Press TV and This Number
Hitachi 1
Zenith
2
Sony 3
Magnavox 4
Sanyo
5
Gold Star 1 6
Toshiba 7
Gold Star 2 8
Panasonic 2 9
RCA
0
Panasonic 1 CH/SET (up arrow)
Mitsubishi
CH/SET (down arrow)
JVC 100/ENT
Sharp 1 MEMORY
Sharp 2 SELECT
CONTROLLING THE TV
Once programmed, the VCR's remote control is ready to control the TV.
NOTE: Be aware that not all of your TV's functions may work even though the remote
control is correctly programmed.
1 Select the TV function mode
First press TV button to change to the TV function mode, then press the button of the
TV function that you want.
For example;
Press TV button and the CH/SET (
), and the TV station will change to the next higher
station.
2 Return to the VCR function mode
Press VCR button to operate your VCR with the remote again.
REMOTE CONTROL OF THE CABLE CONVERTER
If you have a cable converter, you will probably want to program your VCR's remote
control so you can easily change channels. The process is the same as for
programming the remote to operate your TV. For additional details, see the previous
page.
PROGRAMMING THE REMOTE CONTROL OF THE CABLE
CONVERTER