Hitachi VT-MX211A - Manual (Page 17)

PREPARATION FOR USE
17
CONNECTING TO INPUT JACKS
When you copy a video tape, or watch a program recorded on an another source, use
audio/video input jacks.
INPUT SELECT
To use the external input jacks, select the AUX position. Press the CHANNEL or
button or enter "00" with number button on the remote control so that "AUX" appears on
the screen.
Note: "AUX" is found before the lowest memorized channel. (Example: CH2)
INSTALLING THE BATTERIES
1) Open the battery compartment cover by pressing the cover on the remote unit in the
direction of the arrow.
2) Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated
by the polarity (+/-) markings.
3) Replace the cover.