Hitachi VT-MX211A - Manual (Page 33)

SPECIAL PLAY BACK
33
SPECIAL PLAY BACK
Make sure...
• VCR power must be turned on.
• Turn on the TV and set the TV channel to the same video output channel as located
on the back of the VCR. (CH 3 or 4)
• Press VCR/TV button on the remote control so that "VCR" appears on the display.
• You must use the remote control for the following procedure.
AUTO REPEAT PLAYBACK
The VCR has the auto repeat function that allows you to repeat a tape indefinitely
without touching the Play button.
• Insert a prerecorded tape.
1 Select the main menu
Press MENU button.
2 Select "VCR SET UP"
Press CH/SET
or button repeatedly to point to "VCR SET UP".
Then, press SELECT button.
3 Select "REPEAT PLAY"
Press CH/SET
or button repeatedly to point to "REPEAT PLAY".