HP S7300CL User Manual
Page 10
6
Upgrading and Servicing Guide
2 Slide the drive into the drive bay (1), making sure
to align the guide screws with the guide slots, until
it snaps into place.
sliding the drive into the drive bay on the
S0000/8000
(S0000
shown)
3 Reconnect the power and data cables to your drive
as indicated in the following illustrations.
reconnecting the 7-in-1 memory card reader
cable on the S0000 series
reconnecting the diskette drive cables
reconnecting the hard disk drive cables
reconnecting the optical drive cables
NOTE: An optical drive for the 8000 series may
include a sound cable. Connect this cable also.
4 Complete the procedure described in
“reassembling the pc” on page 10.
5 Turn on the PC.
reassembling the diskette adapter
To replace or add a new diskette (floppy) drive on the
8000 series, you need to reassemble the adapter
around the diskette drive. (The S0000 series does not
need an adapter.)
1 Lower the diskette drive into the adapter (1). Ensure
that the holes are aligned, and reinstall the screws
(2) that secure the diskette drive to the adapter.