Standard features, Quickspecs – HP PROLIANT BL685C User Manual

Page 5

Processor

Six-Core Processors

AMD Opteron™ processor Model 8435 (2.6 GHz, 6 MB L3 Cache, 75W ACP)
AMD Opteron processor Model 8431 (2.4 GHz, 6 MB L3 Cache, 75W ACP)
Quad-Core Processors

Quad-Core Processors

AMD Opteron processor Model 8389 (2.9 GHz, 6 MB L3 Cache, 75W ACP)

AMD Opteron processor Model 8387 (2.8 GHz, 6 MB L3 Cache, 75W ACP)

Low Power AMD Opteron processor Model 8381 HE (2.5 GHz, 6 MB L3 Cache, 55W ACP)

NOTE:

NOTE: Offered through Configure-To-Order process only. See Factory Integration Models section for
more details.

NOTE:

NOTE: AMD Opteron 8400 series processors are 64-bit, six-core, and support AMD Virtualization™.
NOTE:

NOTE:

NOTE: AMD Opteron 8300 series processors are 64-bit, quad-core, and support AMD Virtualization™.
NOTE:

NOTE:

NOTE: Processor wattage references reflect Average CPU Power (ACP). For more information on ACP
visit:

http://www.amd.com/powernow

Upgradeability

Upgradeable to quad (4) processors

NOTE:

NOTE: The HP ProLiant BL685c G6 only supports two (2) and four (4) processor configurations.

Cache Memory

512 KB Level 2 cache memory per core

6 MB Level 3 cache memory

Chipset

ServerWorks HT-2100, HT-1000

Memory

Type

PC2-5300 DDR2 Registered DIMMs at 667 MHz
PC2-6400 DDR2 Registered DIMMs at 800 MHz

Standard

8 GB (4 x 2 GB)

Maximum

256 GB (32 x 8 GB) at 533 MHz

NOTE:

NOTE: Memory must be installed in pairs.
NOTE:

NOTE:

NOTE: DIMMs must be installed in decreasing capacity with the largest DIMMs installed in the banks
furthest away from each processor.
NOTE:

NOTE:

NOTE: The memory bus will operate at 800 MHz with four (4) or fewer DIMMs per processor, 667 MHz
with six (6) DIMMs per processor, and 533 MHz with eight (8) DIMMs per processor.

Network Controller

Two (2) embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapters

NOTE:

NOTE: Flex-10 capability requires the use of an HP Virtual Connect Flex-10 10Gb Ethernet module.
Learn more at:

www.hp.com/go/virtualconnect

One (1) additional 10/100 network adapter dedicated to iLO 2 Management

I/O Expansion Slots

Three (3) I/O expansion mezzanine slots (All x8 PCI Express)

QuickSpecs

HP ProLiant BL685c Generation 6 (G6) Server Blade

Standard Features

DA - 13243 Worldwide — Version 2 — June 2, 2009

Page 5