Hoover lV - Manual (Page 16)

Remove the agitator to release
the worn or broken belt by first
removing the agitator dirt seal,
lifting it up and sliding it out.
To provide space for grasping the
agitator, remove end of hose
from holder.
Then grip agitator and pull out.
Remove old belt.
Place one end of the new belt
around agitator pulley with
smooth side of belt against the
pulley.
Line up metal projection on end
of agitator (opposite the belt1
with groove on inside wall of
nozzle. Then slide agitator into
place.
15