Hoover lV User Manual

Page 14

Text mode
Original mode

Push used bag away from holder

and lift out.

Grasp edges of collar section and
push opening of collar section of
new bag onto holder. Make sure

collar is pushed completely up to
the ridge on the holder.

Adjust bag around the motor
housing and open the folds of the
bag to allow the bag to properly
fill.

Make sure all four folds

are open.

NOTE: A bag that does not

expand properly may restrict air
flow. In this event, check the
bag, making sure all the folds
are open. High suction on some
carpet surfaces can cause the
nozzle to hug the carpet and

also restrict air flow. When this
occurs, reducing the suction
with the suction regulator may

be helpful.