Hitachi DV-RX5000U - Manual (Page 33)

33
Edit
ing
[Note]
³ The disc’s available recording time may not increase after
erasing short programs.
³ Computer data cannot be erased.
³ The available recording time on DVD-R does not increase when
you erase programs.
The lock symbol
appears when the
program is write-
protected.
Press [
2] to set
protection and press
[ENTER].
[Note]
³ Use [6], [5] and slow-motion (➜ page 18) to find the start and end points.
³ Play pauses if the end of the program is reached during this procedure.
³ You may not be able to specify points within 3 seconds of each other.
³ You cannot specify an end point before a start point.
³ You cannot specify points on still pictures in the program.
³ The disc’s available recording time may not increase after erasing short segments.
Repeat to enter other sections.
Press [ 3, 4] to
select “Exit” and
press [ENTER].
Press [ 2] to
select “Erase”
and press
[ENTER].
Press [ 3, 4] to select “Next” and press [ENTER], then press [2] to
select “Erase” and press [ENTER].
Press [
2] to select
“Divide” and press
[ENTER].
The program is divided.
0:19 SP Remaining Recording Time
Shorten Segment
Corresponding PLAY LIST will also be erased.
Erase Cancel
RETURN ENTER
SELECT
DIRECT NAVIGATOR
No DATE CH TIME EDIT TITLE
01 4
02 6
03 13
3
3
1
1
1
1
1
ENTER 0 ~ 9
No TOTAL 3 SELECT
RETURN
Shorten
Segment
0 : 00 . 01
Start
– : – – . – –
End
3
Start
End
Next
Exit
0 : 00 . 01
PLAY 03
RETURN ENTER
SELECT
0 : 00 . 01
Start End
3
Start
End
Next
Exit
0 : 10 . 15
RETURN
ENTER
SELECT
0 : 10 . 15
Shorten
Segment
03
3
Divide Program
Divide Cancel
RETURN ENTER
SELECT
Press [
2] to
select “Erase” and
press [ENTER].
The program is erased.
Press [ENTER] at
the end point of the
section you want to
erase.
Press [
3, 4] to
select “Exit”
and press
[ENTER].
Once you divide the program,
it will not be restored to the original.
[Note]
³ The divided programs retain the title and CPRM property (➜ page
50) of the original program.
³ A minute portion of the recording directly preceding the division
point may be lost.
³ It is not possible to carry out Divide Program in the following cases:
–when the program is extremely short.
–when the total number of programs is more than 99.
To confirm the division point
Press [ 3, 4] to select “Preview” and press [ENTER]. (Play will
begin from a point 10 seconds prior to and after the division
point.)
To change the division point
Press [ 3, 4] to select “Divide” and press [ENTER] at the point
you want to change.
9 : 00 PM Auto action 6/20 WED
11 : 00 PM USJ 6/20 WED
6/20 WED 10 : 00 AM Dinosaur
Press [ENTER] at
the point you want
to divide the
program.
Press
[ENTER] at
the start point
of the section
you want to
erase.