Hitachi DV-RX5000U - Manual (Page 24)

24
Timer recor
d
ing
Timer recording
[RAM] [DVD-R]
This is a simple way of specifying a time to stop recording when you
are in a hurry or before you go to bed.
During recording
Press [ ¥, REC] to select the recording time.
Each time you press the button:
0:30 "# 1:00 "# 1:30 "# 2:00 "# 3:00
^"" Counter (cancel) !" 4:00 ,""}
For your reference
≥Press [STATUS] to show the time remaining until recording finishes.
≥This does not work during timer recordings or while using Flexible
Recording ( ➜ page 15).
≥Recording stops and the set time is cleared if you press [∫].
≥The set time is cleared if you change the recording mode or chan-
nel while recording is paused.
Preparation
≥Ensure the clock (and guide channels for VCR Plusr recording,
➜page 8) are set correctly.
≥Release protection (cartridge ➜page 11, disc ➜page 34) before
proceeding. [RAM]
Entering VCR Plus i codes is an easy way of programming the unit
for recording. You can find these codes in newspapers and maga-
zines. You can enter up to 16 programs up to a month in advance.
1
Press
[VCR Plus
r].
2
Press the numbered buttons to enter
the VCR Plus
r code.
Press [ 2] to move
back to correct a
digit.
3
Press [ENTER].
Confirm the program and make corrections if necessary using
[
3, 4, 2, 1].
≥“Invalid Entry” is displayed when you enter the wrong code.
Reenter the code.
≥To change the recording mode
Press [REC MODE].
≥To enter the title of the program
Press [ 2, 1] to select “Enter Title” and press [ENTER]
( ➜page 27).
Repeat steps 1–3 to program other recordings.
4
Press [RETURN].
The timer recording list disappears and the message “TURN
RECORDER OFF FOR TIMER RECORDING” is shown on
the television.
5
Press [ Í, DVD POWER].
Ensure “
F
” lights on the unit’s display.
Specify a time to stop recording
OPEN/CLOSE
SETUP AUDIO INPUT SELECT
CM SKIP
STATUS FRAME
DISPLAY
STOP
PAUSE PLAY
DVD
VCR Plus+ TV/VIDEO REC MODE REC
CH
VOLUME
TV
TV DVD
1 2 3
7 8 9
0 100
4 5 6
SLOW/SEARCH SKIP
DIRECT NAVIGATOR
TOP
MENU
MENU
RETURN FUNCTIONS
PROG/CHECK TIME SLIP ADD/DLT
ENTER
PLAY LIST
CANCEL
POWER
к к
STATUS
RETURN
VCR Plus+
PROG/CHECK
º
ê, DVD POWER
, REC
REC MODE
3, 4, 2, 1
ENTER
Numbered
buttons
e.g.,
Using VCR Plus r codes to make timer
recordings
No.
1:58 SP
VCR Plus E
Remaining Recording Time
3/26 TUE12:53 PM
Enter PLUS CODE Number by using 0–9 key.
1:58 SP Remaining Recording Time
3/26 TUE12:53 PM
VCR Plus E
1 2 1 2 1 2 1 2
SP 5:10 PM 4:20 PM 39 4 / 1 MON 01
MODE OFF ON No CHANNEL DATE
1:58 SP
TIMER TIMER
RECORDING
Remaining Recording Time
3/26 TUE12:53 PM
New Timer Program
Enable
CHECK
5:10 PM 4:20 PM 4 / 1 MON
MODE OFF ON CHANNEL DATE
1:58 SP
SP 39
TIMER
RECORDING
Remaining Recording Time
3/26 TUE12:53 PM
3
4
Enter Title
The current
recording mode
(shown on the
unit’s display) is
automatically
selected.
When you press [ENTER]
Displayed if the
recording can fit
in the remaining
space on the
disc.