HP ProLiant ML330 - Manual (Page 43)

HP Smart Array B110i
SATA RAID Controller
(RAID 0,1,10) Dimensions N/A (embedded)
Disk Drive and
Enclosure Protocol
Support
Architecture 3.0 Gbps SATA
64-bit
SAS Connectors 4 internal x1 SATA connectors
Software Upgradeable
Firmware Yes. HP Smart Array hot plug Advanced Pack No Media 1-Server
license including 1yr 24x7 Technical Support
Maximum Capacity 2TB
Memory Addressing 6GB (maximum)
Logical Drives
Supported 2 (maximum)
RAID Support RAID 1 (Mirroring)
RAID 0 (Striping)
RAID 10
HP 250GB 3G SATA
7.2K NHP 3.5" MDL
HDD Capacity 250,059MB
Height * 1.028 in (26.1 mm)
Width 4.00 in (101.6 mm)
Depth * 5.787 in (147.0 mm)
Interface Serial ATA
Transfer Rate
(Maximum) 3Gb/s
Native Command
Queuing N/A
Seek Time
(typical reads, including
settling) Single Track 1.0 ms
Average <8.5 ms
Full-Stroke 17.0 ms
Rotational Speed 7,200 rpm
Physical Configuration Bytes/Sector 512
Logical Blocks 488,397,168
Operating Temperature41° to 131° F (5° to 55° C)
* Maximum drive dimension
QuickSpecs
HP ProLiant ML330 Generation 6
Technical Specifications
DA - 13361 Worldwide QuickSpecs — Version 17 — 3-31-2010 Page 43