Quickspecs – HP ProLiant ML330 User Manual
Page 22
HP Power Supplies
NOTE: It is highly recommended that you use the HP Power Advisor in defining
the "Right-Size" power supply for your need. The HP Power Advisor is located
CAUTION: Optional Power Supplies used for Redundancy "must" match the
original supplied power supply. Upgrades for more power headroom, when
replacing the original power supplies must match if purchased for redundancy.
Option Kits contain optional power supply, an IEC power cable and PDU IEC
cables. In ProLiant Servers that have more than one power slot (bay), only same
size power supplies are recommended. If non-matched power supplies are
inserted you will get errors and operation will fail.
HP 750W CS HE Power Supply
NOTE: The HP 750W power supply requires purchasing the Redundant Power
Supply Enablement Kit (P/N 508544-B21).
512327-B21
HP Redundant Power Supply Enablement Kit
NOTE: The Redundant Power Supply Enablement kit does not integrate any
power supply. To enable full Redundancy, it requires 2 units of 750W Power
supply.
508544-B21
HP Cooling Options
HP 5U G6 Redundant fan kit
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU
IEC cables.
513927-B21
QuickSpecs
HP ProLiant ML330 Generation 6
Core Options
DA - 13361 Worldwide QuickSpecs — Version 17 — 3-31-2010
Page 22