HP 7000N - Manual (Page 80)

Replace the hard drive
To replace the hard drive, follow these steps.
1. Press the Power button to turn off the product (1), press the Power switch on the back of the
product to the off position (2), disconnect power from the product (3), and then disconnect the
Ethernet cable (4).
2. Loosen the three screws which secure the back panel drawer to the product, and then slide the
back panel/drawer far enough out so you can see the hard drive and reach the hard drive
cables.
3. Unfasten the cable ties which secure the cables to the hard drive.
72 Chapter 7 Manage and maintain the product