Hobart Welding Products HANDLER 140 OM-925 - Manual (Page 46)

OM-925 Page 42
SECTION 10 − ACCESSORIES/CONSUMABLES
10-1. Accessories
PART NO. DESCRIPTION REMARKS
770 187 Running Gear/Cylinder Rack For One Small Gas Cylinder, 100 lb (45 kg) max.
194 776 Small Running Gear/Cylinder Rack For One Small Gas Cylinder, 75 lb (34 kg) max.
195 186 Protective Cover Weatherproof Nylon
10-2. Consumables
Item Hobart Package Part No.* Miller Package Part No. **
Contact Tips
.023/.025 in (0.6 mm) 770 174 (5 per package) 087 299 (10 per package)
.030 in (0.8 mm) 770 177 (5 per package) 000 067 (10 per package)
.035 in (0.9 mm) 770 180 (5 per package) 000 068 (10 per package)
MIG Nozzle (Standard) 770 404 169 715
Gasless Flux Cored Nozzle 770 487 226 190
Tip Adapter 770 402 169 716
Wire Inlet Guide — 203 025
Replacement Liners
.023/.025 in (0.6 mm)
196 139 194 010
.030/.035 in (0.8/0.9 mm) 196 139 194 011
.035/.045 in (0.9/1.2 mm) 196 140 194 012
*Available at farm and tool supply retailers.
** Available at Hobart/Miller welding distributors.
10-3. Replacement Drive Rolls
For All Feed Head Assemblies
PART NO.
WIRE DIAMETER
INCHES (mm)
202 925 .023/.025 (.6) and .030/.035 (.8 and .9)
202 926 .030/.035 (.8 and .9) and .045 (1.2 VK Groove)
10-4. Regulator/Flowmeter
PART NO. REMARKS
221 037**
For Argon and Argon mixed shielding gas. Use with
replacement hose 222 874. 770 198*
212 492**
For CO
2
shielding gas. Use with replacement gas hose
144 108.
*Available at farm and tool supply retailers.
**Available at Hobart/Miller welding distributors.
NOTE: A complete Parts List is available on-line at
www.HobartWelders.com
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.