4 specifications, Table 2-6 power supply electrical specifications – HP DC5850 User Manual
Page 26
2-10
www.hp.com
Technical Reference Guide
System Overview
2.4 Specifications
This section includes the environmental, electrical, and physical specifications for the systems
covered in this guide. Where provided, metric statistics are given in parenthesis. Specifications
are subject to change without notice.
NOTE:
[1]
Peak input acceleration during an 11 ms half-sine shock pulse.
[2]
Maximum rate of change: 1500 ft/min.
NOTE:
Optional Energy Star 4.0 with 80-Plus Bronze-level compliant power supply unit available for both form factors.
Table 2-5
Environmental Specifications (Factory Configuration)
Parameter
Operating
Non-operating
Ambient Air Temperature
50
o
to 95
o
F (10
o
to 35
o
C, max.
rate of change < 10
°C/Hr)
-22
o
to 140
o
F (-30
o
to 60
o
C, max.
rate of change < 20
°C/Hr)
Shock (w/o damage)
5 Gs [1]
20 Gs [1]
Vibration
0.000215 G
2
/Hz, 10-300 Hz
0.0005 G
2
/Hz, 10-500 Hz
Humidity
10-90% Rh @ 28
o
C max.
wet bulb temperature
5-95% Rh @ 38.7
o
C max.
wet bulb temperature
Maximum Altitude
10,000 ft (3048 m) [2]
30,000 ft (9144 m) [2]
Table 2-6
Power Supply Electrical Specifications
Parameter
Value
Input Line Voltage:
Nominal:
Maximum
100–240 VAC
90–264 VAC
Input Line Frequency Range:
Nominal
Maximum
50–60 Hz
47–63 Hz
Energy Star 4.0 with 80Plus Bronze-level compliancy
SFF
MT
Optional
Optional
Maximum Continuous Power:
SFF
MT
240 watts
300 watts