Quickspecs, Hp proliant ml110 generation 5 – HP ProLiant ML110 User Manual

Page 29

HP 4 Internal Port SAS

HP 4 Internal Port SAS
Host Bus Adapter

Host Bus Adapter

Host Bus Adapter
(SAS/SATA HP Model)

SATA Protocol

SATA 1.5Gb/s

SATA Ports

4 internal

Port transfer rate

1.5 Gb/s total

Maximum Capacity

up to 3.0TB (4 x 750GB Non-Hot Plug SATA HDD)

RAID Levels Supported

RAID 1 (Mirroring)
RAID 0 (Striping)

Logical RAID Volumes

Logical RAID Volumes
Supported

Supported

Dimensions

Dimensions (excluding
bracket)

6.6 x 2.5 x 0.6 in (16.8 x 6.4 x 1.6 cm)

Disk Drive and Enclosure

Disk Drive and Enclosure
Protocol Support

Protocol Support

3 Gbps SAS (Serial Attached SCSI)
1.5 Gbps SATA (Serial Advanced Technology Attachment)

Architecture

64-bit

SAS Connectors

1 internal SFF8484 x4 Wide SAS Connectors
12 Gbps per x4 Wide SAS Port (4 x 3 Gbps)

Data Transfer Method

PCI-Express x8 - 2 GB/s maximum bandwidth

PCI Bus Speed

PCI-Express x8

Simultaneous Drive

Simultaneous Drive
Transfer Ports

Transfer Ports

1 x4 Wide SAS Connectors

Port Transfer Rate

12 Gb/s per x4 Wide SAS Port (4 x 3 Gb/s)

Software upgradeable

Software upgradeable
Firmware

Firmware

Yes

Maximum Capacity

1.2TB (4 x 300GB)

Memory Addressing

64-bit, supporting servers memory greater than 4 GB

Logical Drives Supported

Logical Drives Supported Up to 2 Logical Volumes

Up to 10 drives total in all RAID volumes
Up to 2 Drives per RAID 1
Up to 4 Drives per RAID 0

RAID Support

RAID 1 (Mirroring)
RAID 0 (Striping)

Upgradeable Firmware

4-MB flashable ROM

Disk Drive and Enclosure

Disk Drive and Enclosure
Protocol Support

Protocol Support

3 Gbps SAS and 1.5 Gbps SATA

QuickSpecs

HP ProLiant ML110 Generation 5

Technical Specifications

DA - 12867 North America — Version 12 — June 6, 2008

Page 29