Quickspecs, Step 1: base configuration, Hp proliant ml110 generation 5 – HP ProLiant ML110 User Manual

Page 13

NOTE:

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE:

NOTE:

NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE:

NOTE:

NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE:

NOTE:

NOTE: FIO indicates that this option is a Factory Installable Option.

Step 1: Base Configuration

Models

HP ProLiant ML110G5 NHP CTO Chassis

445607-B21

Factory Integrated Models ship with:

Embedded NC105i PCI Express Gigabit Ethernet Server Adapter

Keyboard and Mouse

365 Watts, PFC (Power Factor Correcting)

Micro ATX Tower (4U)

NOTE:

NOTE: HP SATA Drive Models are limited to <3.0TB support.

NOTE:

NOTE: On SATA models with embedded RAID, setup instructions are located in the
User Guide. CTO RAID set-up is not available. HP ProLiant ML100 Series Server User
Guide:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00260539/
c00260539.pdf

Step 2: Choose Required Options (only one of the following from each list unless otherwise

Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)

noted)

Processors

Quad-Core Processor

Quad-Core Intel® Xeon® Processor X3350 (2.66 GHz, 95W, 1333FSB, 12M), FIO

464374-L21

Quad-Core Intel® Xeon® Processor X3320 (2.50 GHz, 95W, 1333FSB, 6M), FIO

464375-L21

Quad-Core Intel® Xeon® Processor X3220 (2.40 GHz, 95W, 1066 FSB, 8M), FIO

455069-L21

Quad-Core Intel® Xeon® Processor X3210 (2.13 GHz, 95W, 1066 FSB, 8M), FIO

455068-L21

Dual-Core Processor

Dual-Core Intel® Xeon® Processor E3110 (3.00 GHz, 1333 FSB, 6M),FIO

464376-L21

Dual-Core Intel® Xeon® Processor X3075 (2.66 GHz, 65W, 1333 FSB, 4M), FIO

450454-L21

Dual-Core Intel® Xeon® Processor X3065 (2.33 GHz, 65W, 1333 FSB, 4M), FIO

450360-L21

Dual-Core Intel® Core 2 Processor E4600 (2.40 GHz, 65W, 800 FSB, 2M), FIO

481618-L21

Dual-Core Intel® Pentium® Processor E2160 (1.8GHz, 65W, 800 FSB, 1M), FIO

450359-L21

Single-Core

Single-Core Intel® Celeron® Processor 440 (2.0GHz, 35W, 800 FSB, 512K), FIO

455072-L21

Single-Core Intel® Celeron® Processor 420 (1.6GHz, 35W, 800 FSB, 512K), FIO

455071-L21

QuickSpecs

HP ProLiant ML110 Generation 5

Configuration Information-Factory Integrated Models

DA - 12867 North America — Version 12 — June 6, 2008

Page 13