Hitachi VT-M291A - Manual (Page 75)

CABLE CHANNEL DESIGNATIONS
75
REMOTE CONTROL OF THE CABLE CONVERTER
If you have a cable converter, you will probably want to program you VCR's remote
control so you can easily change channels. The process is the same as for
programming the remote to operate your TV. For additional details see the previous
page.
1
Hold down the CATV button and press the number of your brand of cable box (shown in
the chart below).
Note:
If that button combination does not work, or if your brand is not on the chart, just go
through all the button combinations until you find the one that works best.
Cable Converters Press CATV and This Number
Jerrold 1 1
Jerrold 2 2
Jerrold 3 3
Hamlin 4
Zenith 5
Scientific Atlanta 6
Pioneer 7
Philips 8
To operate the cable box once the remote is programmed for it.
1
Press CATV and then the button of the function you want.
2
Press VCR button to operate your VCR with the remote again.
CABLE CHANNEL DESIGNATIONS