Hitachi VT-M291A - Manual (Page 68)

SPECIAL FEATURES
68
If you use the PAUSE button to freeze the picture during playback with tapes recorded
in SLP mode, usually there will be video "noise" lines on the screen. This is normal,
however, this VCR has a special feature that allows you to reposition or reduce the
lines. Each time you press PAUSE button the lines will change position on the screen.
This enables you to see the picture in its entirety without distracting noise lines.
If the tape was originally recorded in SP or LP mode, the still picture will, in addition to
the "noise" lines, be black and white.
THIS IS NOT A FAULT OF THE MACHINE BUT MERELY A BY-PRODUCT OF THE
TECHNOLOGY INVOLVED IN PRODUCING A VCR WITH A LONG-PLAY MODE.
Tracking Adjustment - "DTR"
Tracking adjustment will be set automatically (Digital Tracking function) when you
start playback. "DTR" appears on the display.
When playing pre-recorded tapes or tapes recorded on units other than your own,
noise lines (black and white streaks) may appear on the playback picture. If this occurs,
adjust the tracking control by pressing CHANNEL
or button until the streaks
disappear. To return to the DTR function, stop the tape once and start playback again.
NOTE: This function is controlled only by the buttons on the VCR. This buttons on the
remote control will no adjust tracking.
Auto Rewind
When the end of a tape is reached during recording, playback, or fast-forward, the tape
will automatically rewind to the beginning (or to the 0:00:00 counter reading if the
memory function is activated), eject, and the VCR will turn off.
NOTES:
The tape will not auto-rewind during timer recording or Instant Recording Timer.
When the tape is rewound to the preset memory position, the tape will not eject and the
VCR will not turn off.