Hoover Carpet Cleaner - Manual (Page 7)

7
1. Hand grip
2. Solution trigger: press to
release clean solution.
3. Clean Surge™ button
4. Cord clip: place cord in
clip to keep it out of the
way when using cleaner
5. Hose
6. Hose holder: wrap hose
around holder and hooks
for storage.
7. Hose hooks
8. Cord hooks: wrap cord
around hooks for storage.
The top hook can be rotat-
ed right or left for quick
and easy cord release.
9. Stair/upholstery nozzle
10. Carrying handle
11. Clean solution tank
handle
12. Clean solution tank cap/
measuring cup
13. Clean solution tank:
holds cleaning solution.
14. Recovery tank lid
15. Recovery tank: holds
dirty solution.
2. How to use
The assembled carpet cleaner will look like the drawing.
2-1
2-2
16. Recovery tank front
panel
17. Hood
18. Brush speed selector:
slide selector to set brush
speed on HI, LO, or OFF.
19. Brush Indicator: spins
when brushes are rotating.
20. Nozzle
21. Solution tube connection
22. Recovery tank latches
23. ON/OFF pedal
24. Handle release pedal:
step on pedal to lower
handle to operating (floor)
position.
This carpet cleaner is intend-
ed for household use.
Operate carpet cleaner only
at voltage specified on data
plate on back of cleaner.
Plug carpet cleaner Into a
properly grounded outlet.
ON/OFF pedal &
Handle release pedal
Step on pedal (A) to turn carpet
cleaner on. Step on pedal again to
turn carpet cleaner off.
Step on pedal (B) to lower handle to
operating position. Handle does not
lock into a single position but “floats”
to allow convenient operation.
A
B
To transport
To move your carpet cleaner from
room to room put handle in upright
and locked position tilt carpet
cleaner back on wheels and push
forward.
2-3
The carpet cleaner may also be lift-
ed by placing a hand under the
upper clean solution tank handle as
shown.
1
3
2
4
5
8
7
7
6
5
8
9
10
11
12
13
14
15
16
17
18
19
20
21 24
22
24
Carpet cleaner description
2-4
Continued ➔