HP 7700 - Manual (Page 28)

hp photosmart 7700 series
chapter 4
24
safety information
Always follow basic safety precautions when using this product to reduce risk of
injury from fire or electric shock.
Warning! To prevent fire or shock hazard, do not expose this product to rain
or any type of moisture.
Warning! Potential shock hazard.
• Read and understand all instructions in the HP Photosmart Setup Guide.
• Use only a grounded electrical outlet when connecting the unit to a power
source. If you do not know whether the outlet is grounded, check with a
qualified electrician.
• Observe all warnings and instructions marked on the product.
• Unplug this product from wall outlets before cleaning.
• Do not install or use this product near water or when you are wet.
• Install the product securely on a stable surface.
• Install the product in a protected location where no one can step on or trip
over the power cord, and where the power cord will not be damaged.
• If the product does not operate normally, see the troubleshooting
information in the HP Photosmart Printer Help.
• There are no operator serviceable parts inside. Refer servicing to qualified
service personnel.
• Use in a well-ventilated area.
environmental statements
Hewlett-Packard Company is committed to providing quality products in an
environmentally sound manner.
protecting the environment
This printer has been designed with several attributes to minimize impact on our
environment. For more information, go to HP’s Commitment to the Environment
Web site at www.hp.com/hpinfo/globalcitizenship/environment/index.html.
ozone production
This product generates no appreciable ozone gas (O3).