HP 2500C/CM User Manual
Page 39
35
LEFT BACK PANEL
The left side of the Back
Open the Rear Access Door and ensure
OUT
Panel has not been
that the left side of the panel is
inserted properly.
properly installed.
RIGHT BACK
The right side of the
Open the Rear Access Door and ensure
PANEL OUT
Back Panel has not
that the right side of the panel is
been inserted properly.
properly installed.
TRAY 2 PAPER
One of the Paper Guides
Insert the missing Paper Guide back into
GUIDE REMOVED
in Tray 2 has been removed.
Tray 2.
TRAY 3 OPEN OR
Tray 3 is either open or one
Ensure that both the Paper Guides are
GUIDE REMOVED
of its Paper Guides has
properly installed and that Tray 3
been removed.
is inserted into the printer.
TRAY 1 LOAD
You have chosen to print
Load the paper type and size as
[TYPE] [SIZE]
from Tray 1 or the media
specified in the LCD panel and press
you have selected differs
to continue printing. You may
from those in Trays 2 and 3.
set the printer to print with existing
media in Tray 2 or Tray 3 by either
pressing [Value] or without loading
media in Tray 1.
MNL FEED LOAD
You have chosen to print
Load the paper type and size as
[TYPE] [SIZE]
through the Rear Manual
specified in the LCD panel into the
Feed.
Rear Manual Feed located at the back
of the printer and press to continue
printing.
TRAY [NUMBER]
The specified tray is empty.
Load the paper size and type which
EMPTY, LOAD &
this tray has been set up for. If you
PRESS
wish to change the paper size setting of
this tray, please
USE [TYPE]
The media you have chosen
Press to print or [Value] to select
[SIZE] INSTEAD?
differs from those in Trays 2
other options.
and 3 and you have either
pressed [Value] or without
loading media in Tray 1.
PRESS TO
To continue your present
CONTINUE
task, press the button.
MEDIA IN TRAY 1,
The media in Tray 1 may
Remove the media in Tray 1 and press
REMOVE
not be the type or size
the button to resume printing.
that is specified in your
current print job.
If you wish to print through Tray 1, set
your print setting to pick from Tray 1
and send the print job before putting
media in Tray 1.
USG_EuCM.qxd 18/1/99 10:11 AM Page 35