HP 2500C/CM - Manual (Page 29)

3
2
1
7
If your printer has the PostScript module installed, you may install up to
64 MB of additional memory.
See Supplies and Accessories
To do so:
1.
Put on the anti-static wrist strap and clip the other end to a grounded
metal piece.
Note: Failure to do so may damage the printer or the memory module.
2. Switch off your printer and remove all cables from the back of the
printer.
3. Lift up the 2 rear door latches to open the Rear Access Door.
25
2500C/CM HP Installing Additional Memory
2500C/CM
Pr ofessi onal Series Color Pr
inter
HP
PostScript CD
12. Install the PostScript 3 software from the accompanying CD. Refer to
the back of the CD jacket for installation instructions.
USG_EuCM.qxd 18/1/99 10:11 AM Page 25