HP 3C590-TPO - Manual (Page 8)

2 Connecting to a Netware 4.11 Server
Windows for Workgroups
6 Remove the 3com cards driver diskette and insert Netware client for DOS
and MS-Windows disk 1.
7 Execute INSTALL.EXE and set lines 1-5 as listed below;
8 C:\NWCLIENT
9 YES
10 YES
C:\WINDOWS
11 NO
12 3COM Etherlink III Parallel Tasking Family.
13 Highlight option 6 to continue with installation.
14 When prompted, insert the corresponding disks to complete file transfer
and driver installation.
15 When the install utility is finished, press to restart
the machine.
16 After windows loads, open the “NETWORK” folder, double-click the
“NETWORK SETUP” icon.
17 Select “Networks”, and verify that “Novell Netware (Workstation Shell 4.0
and above)” is listed under “Install Windows support for the following
network only:” and click on “OK.”