HP 3C590-TPO - Manual (Page 32)

4 Connecting to a Windows NT Server 4.0
Windows NT Workstation Version 3.51
9 Double click on the “Network” icon and agree to install Windows NT
Networking on your computer.
10 Insert the Windows NT Workstaion CD.
11 In “Windows NT Setup”, enter the path to your NT files and click on
“Continue.” (If you have an HP preloaded HDD, set path to “C:\I386”)
12 Click on “Do Not Detect” from the “ Network Adapter Card Detection”
dialog box, and click on “Continue” in the second “Network Adapter Card
Detection” dialog box.
13 From the “Drop Down List”, scroll down and select “ Requires
disk from manufacturer” then click on “Continue“.
14 Set the path to “A:\” in the “Insert Disk“ dialog box, and then insert the
3COM 3C509 drivers disk.
15 Click “OK” at the “Install Driver” dialog box. (If you have an HP preloaded
HDD, set path to “C:\LANDRV\3C509\)
16 Select “3Com Etherlink III (3C509) ISA Adapter” in the “Select OEM
Option” dialog box, and click “OK”.
17 Click on the “OK” button in the “Bus Location” dialog box.
18 Choose the appropriate network protocols by clicking the check boxes in
the “Windows NT Setup” dialog box and click on “Continue.” (If you do
not have the required information, contact your network administrator)
19 Choose to install all applicable TCP/IP options and select “Continue.” (If
you do not have the required information, contact your network
administrator)
20 At the “Network Settings” dialog box, click on “OK.”
21 Accept the default “NWLink IPX/SPX Protocol Configuration” and hit
enter.
22 At the “TCP/IP Configuration” screen, choose to use DHCP or enter your
TCP information and click on “OK.” (If you do not have the required
information, contact your network administrator)
23 At the “Domain/Workgroup Settings” Dialog Box, click on “OK” to accept
the default “Workgroup” as your workgroup name. (If you do not have the
required information, contact your network administrator)