HP Integrity server blade BL860c - Manual (Page 30)

System Unit Dimensions Height 14.42 in (36.63 cm)
Depth 20.02 in (50.85 cm)
Width 2.03 in (5.16 cm)
Shipping Dimensions Height 21.50 in (54.61 cm)
Depth 23.13 in (58.75 cm)
Width 9.94 in (25.25 cm)
Weight Maximum 22.8 lbs (10.3 kg)
Temperature Range * Operating 10° to 35° C (50° to 95° F)
Non-Operating -40° to 60° C (-40° to 140° F)
Storage -20° to 60° C (-4° to 140° F)
Maximum Wet Bulb
Temperature 30° C (86° F)
Relative Humidity ** Operating 10% to 90%
Shipping 10% to 90%
Storage 10% to 95%
* All temperature ratings shown are for sea level. An altitude derating of 1°C per 304.8 m (1.8°F
per 1,000 ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed. Upper operating limit
is 3,048m (10,000 ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or 30.3
KPa/4.4 psia.
** Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F).
Altitude maximum for storage corresponds to a pressure minimum of 70 KPa.
SAS RAID LSI 1068
Controller Disk Drive and
Enclosure Interface 3G SAS (Serial Attached SCSI)
SAS Connectors 2 internal (SFF8484) x4 wide port connectors
Cache Memory Speed DDR-1/266 MHz provides up to 4.2 GB/s maximum bandwidth.
Server Interface x8 2.5G PCIe provides 2GB/s maximum bandwidth.
SAS Speed x8 3G SAS provides 2.4GB/s maximum bandwidth.
Cache Memory 40-bit 64MB or 128MB cache: ECC protection, battery-backed, and
transportable
Logical Drives
Supported Up to 32 logical volumes
Maximum Logical Drive
Capacity 292GB (2 x 146GB)
Host Memory
Addressing 64-bit, supporting greater than 4GB server memory space
RAID Support RAID 1 (Mirroring)
Upgradeable Firmware Upgradeable Firmware
QuickSpecs
HP Integrity BL860c Server Blade
Technical Specifications
DA - 12671 U.S. QuickSpecs — Version 18 — 2/18/2009 Page 30