HP Integrity server blade BL860c - Manual (Page 27)

DIMM installation guidelines:
All DIMMs must be PC2-4200 DIMMs (DDR2 533MHz) 1.
Both DIMM slots in a memory bank must be populated. 2.
Banks must be populated in sequential numeric order, starting with bank 0. 3.
Both DIMMs in a memory bank must be identical. Install identical DIMMs in pairs, starting with DIMM socket A, bank 0. 4.
DIMMs must be installed in decreasing capacity with the largest DIMMs installed in the smallest numbered DIMM slot. 5.
HP Integrity BL860c Server Blade
Standard Memory
4 GB Registered PC2-4200, DDR2 533MHz ECC DIMMs (4 x 1 GB)
Memory Bus Bandwidth:12.8 GB/s
Standard Memory Plus Optional Memory
Up to 48GB of PC2-4200, DDR2-533 DIMMs memory is available.
Memory Slot
Standard 4 GB 0A 0B 2A 2B 4A 4B
1 GB 1 GB Empty Empty Empty Empty
1A 1B 3A 3B 5A 5B
1 GB 1 GB Empty Empty Empty Empty
Maximum 48 GB 0A 0B 2A 2B 4A 4B
4 GB 4 GB 4 GB 4 GB 4 GB 4 GB
1A 1B 3A 3B 5A 5B
4 GB 4 GB 4 GB 4 GB 4 GB 4 GB
Following are memory options available from HP:
HP 2GB PC4200 DDR-SDRAM(2x1GB DIMMs) AD343A
HP 4GB PC4200 DDR-SDRAM(2x2GB DIMMs) AD344A
HP 8GB PC4200 DDR-SDRAM(2x4GB DIMMs) AD345A
NOTE: Must be installed in pairs.
NOTE: DIMMs must be installed in decreasing capacity with the largest DIMMs smallest numbered slot.
QuickSpecs
HP Integrity BL860c Server Blade
Memory
DA - 12671 U.S. QuickSpecs — Version 18 — 2/18/2009 Page 27