Heat & Glo Fireplace CRESCENT II - Manual (Page 33)

Heat & Glo • Crescent II • 2083-902 Rev. L • 7/08 33
12 12
Appliance Setup
A. Remove Shipping Materials
Remove shipping materials from inside and underneath the
fi rebox. A shipping bracket on the bottom front face must
be removed. Remove the screws and shipping bracket and
discard (see Figure 12.1).
Shock or fi re risk.
Use ONLY optional accessories approved for
this appliance.
• Using non-listed accessories voids warranty.
• Using non-listed accessories may result in a
safety hazard.
• Only Hearth & Home Technologies approved
accessories may be used safely.
WARNING
Figure 12.1
REMOVE (4) NUTS
AND SHIPPING BRACKET
SHIPPING
BRACKET
B. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated
inside the fi rebox or underneath in the control cavity.
C. Accessories
Install approved accessories per instructions included
with accessories. See Service Parts List for appropriate
accessories. Refer to Section 16.