HP 7150 - Manual (Page 17)

get started: print cartridge information 13
7 Insert the print cartridge:
• Hold the print cartridge so that the copper contacts will
go into the printer first. Line up the ridges on the left
and right sides of the top of the print cartridge with the
grooves on the inside of the print cartridge cradle.
Carefully slide the print cartridge into the cradle, then
firmly push the cartridge in until it stops.
• Lower the cradle latch. Place your finger on the top of
the latch. Place your thumb under the number on the
latch and hold it forward while pushing the latch down.
Release the latch to lock the print cartridge into place.
8 Close the top cover.
A calibration page prints. Make sure plain paper
is loaded in the IN tray.
tw_basics.book Page 13 Monday, July 1, 2002 8:47 AM