HP T5000 - Manual (Page 24)

20 www.hp.com Quick Reference Guide
Display a notification when the Windows Firewall blocks a
program is selected by default.
You can set a scope for each exception. For home and small office
networks, it is recommended that you set the scope to the local
network only where possible. This will enable computers on the
same subnet to connect to the program on the machine, but drops
traffic originating from a remote network
■ Advanced Tab: Enables you to configure the following
functions.
❏ Network Connection Settings: Select connection-specific
rules which apply per network interface.
❏ Security Logging: Create a log file for troubleshooting.
❏ ICMP: With Global Internet Control Message Protocol
(ICMP) the computers on a network can share error and
status information.
❏ Default Settings: Restore Windows Firewall to a default
configuration.