Hoover S1223 User Manual

Page 24

4. If belt is not broken, pull it off the
motor pulley.

5. Return cleaner to bottom side up.

Remove agitator and belt.

6. Slip agitator through new belt
(with lettering toward outside of
cleaner) and position belt in belt

guide. Lower end of belt into
opening in cleaner body; reposition
agitator.

7. Place the three tabs on bottom

plate into slots in front of cleaner
body. Snap bottom plate into place

over agitator. Turn agitator, making
sure the belt is not pinched

between agitator and cleaner body.

The belt must rotate freely inside
the belt guide. If agitator does not

turn, remove bottom plate and

reposition belt in belt guide.