Hoover S1223 - Manual (Page 12)

The assembled cleaner will look
like the drawing below.
1. Handle
2. Cord hooks: wrap cord
around hooks for storage. The top
hook can be rotated right or left for
easy cord release.
3. Bag door latch
4. ON/OFF switch: located on
side of handle.
5. Bag door
6. Stair cleaning handle: located
on lower edge of bag.
7. Handle release lever: step on
lever to lower handle to operating
or low position.
8. Cleaner body
9. Nozzle control knob: slide
knob to correct setting for height of
carpet being cleaned.
10. Furniture guard: helps
prevent cleaner from marking
furniture.
11. Headlight
12. Hose door: open door to
connect hose to cleaner.
13. Hood
14.
15. Tool rack*
16. Dusting brush’
17. Crevice tool*
18. Furniture nozzle*
* Available on some models.
Operate cleaner only at vottage
specified on bottom plate on
bottom of cleaner.