Hoover S1223 - Manual (Page 22)

2. Place handle in operating
position and turn cleaner over.
Insert end of flat screwdriver into
one of the four slots beside an
arrow on bottom of cleaner.
3. For slots nearest the rear
wheels, push handle of screwdriver
toward cleaner handle; for remain-
ing two slots, pry outward to
release latches.
4. Turn cleaner over and lift off
hood.
5. Remove bulb by pulling straight
out of socket; push new bulb into
socket until it locks in place.
6. Place hood on cleaner body and
press firmly to snap all four latches.
Pull up on hood slightly to make
sure all four latches are secured.
Push nozzle control knob back onto
front of cleaner.
19