Carpet adjustment – Hoover S1223 User Manual

Page 14

Carpet

adjustment

The cleaning of carpet and rugs
takes place at the nozzle.

It is necessary to raise and lower

the nozzle for various carpet pile

heights by sliding the nozzle

control knob to the correct setting.

For ease in sliding knob, the handle
should be in the upright position.

The nozzle will not move Into the

adjusted position until the
cleaner handle is lowered to the
operating position.

NOZZLE

maximum cleaning performance the following carpet height settings

are recommended.

BARE FLOOR

HIGH

Cleaners with two settings:

Lowest setting (A):

Highest setting (B):

for

floors and all types of carpet.

if easier pushing is desired while maintaining
good cleaning performance.

Cleaners with Four settings:

Lowest setting (1):

for bare floors and low pile, level loop, kitchen

type carpet.

Next

(2):

for other types of carpet.

Higher

for very deep pile carpet where easier

effort is desired, while maintaining

good c eaning performance.

Note: If the cleaner is difficult to push, slide the knob to the next higher
setting.